|
Skillbuilder batting cage frames are easy to install. The frames are among the strongest available and are constructed of high quality commercial 2¼" steel tubing. The elbows and feet are fluted for easy connections. You may purchase complete frames (ready to install), however, due to shipping costs, you may want to go with our frame kit and purchase your steel uprights locally.
All of our frames are 15½' wide and can be used for either a 12' wide net or 14' wide net.
Frame Kit
BEST VALUE - Everything to build your frame is included, except the 10' lengths of 2¼"(OD) steel tubing and the 10' lengths of 1⅝"(OD) steel tubing for the angle supports, which you must purchase locally. The frame kit includes the frame elbows, feet (ground sleeves), eye bolts, cables, turnbuckles (for both ends), clips, (to hook the net to the cables), self-drilling screws, and the angle supports (to support the end arches and prevent them from bowing toward the middle when you tighten the cage's end ropes). 55' frames include three arches and 70' frames include four arches.
You must purchase three 10' lengths of 2" thin wall EMT (electrical conduit) for each arch and four 10' lengths of 1 1/2" tubing for the angle supports. The lengths of 2" tubing and the lengths of 1 1/2" tubing can be purchased at Lowes, Home Depot, or similar store. They will also deliver for a small charge.
Complete Frame includes all the 10' lengths of 2" and 1½" EMT for the arches sides and top, the angle supports, eye bolts, cables, turnbuckles (for both ends), clips, (to hook the net to the cables), self-drilling screws. The 55' long frame consists of three arches and the 70' long frame consists of four arches.
|
